A new software update based on Android 4.2.2 Jelly Bean with firmware build number I9500XXUBMG9 has been rolled out on Samsung Galaxy S4 with model number GT-I9500.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XXUBMG9 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 XXUBMG9 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 XXUBMG9 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

★★★SPEED UP! THREE TIMES FASTER DOWNLOADS FOR ANDROID★★★
★☆★MORE THAN 5 MILLION USERS CHOICES OUR DOWNLOADER★☆★

☆ Free Download Manager for video download or free downloads any type of file.
★ We support all types like APK, RAR, ZIP, MP3, DOC, XLS or other files.

☆ Use Download Manager for Android to efficiently download and manage any type or size file in your phone or tablet. This FREE Android downloader Overcomes most of the limitations of the default downloads, such as authentication, integrity checking, support for all file types and download life cycle management, making downloading just a breeze with our download manager!

Check our Downloader Web Browser Features!
+ Tabbed browsing
+ Support for HTTP basic authentication for web pages
+ Simple and clean user interface
+ Bookmark manager
+ Quick search with voice added with default speech recognition
+ Address bar auto suggestion from history
+ Supports Java Scripts
+ Support HTML 5 web pages and videos
+ Integrated Google, Youtube, Twitter and Yahoo! search
+ Ability to spoof browsers User Agent string to display web pages like desktop, iPhone, iPad, Firefox, Chrome, Safari, Internet Explorer, Nokia Lumia or another downloader
+ Browsing speed has been optimized

Download Manager and File Manager Features
+ Fast app, files and website downloading speed
+ Android Downloader is designed for UI
+ Supports resuming of interrupted downloads reliably
+ Live downloading progress bar for speed indicator
+ Active downloads badge number
+ Add arbitrary download link
+ You can specify downloads with correct filename
+ Able to download file of unknown size and unknown format
+ Delete file option added
+ More information like finished download, file deleted toasts added
+ Added set downloaded music as ringtone, notification and alarm sound feature
+ Added set image as wallpaper, lock screen, contact avatar, Whats App avatar
+ Open feature allows opening files in different apps installed on the device
+ Download notifications have been added (Both inside the app and outside as well)
+ Android Background downloading
+ Supports pause/resume or canceling the downloading file anytime reliably through easy to use android downloader controls
+ Download files in parallel parts reusing connections to significantly increase downloading speed
+ Support for threaded parallel downloads with multitasking
+ Start downloads from your browser or email using the link share intent, or by entering the URL manually
+ Resume broken downloads, for example after connection drops or device restart
+ Maintain download state even after app is destroyed.Our Android Downloader always stable.
+ Support for MD5 checksums to ensure file integrity is planned to add next version
+ Support for large file downloads (over 2 GB)
+ Support for Wi-Fi mode (transfer bytes only via Wi-Fi)
+ Supports many applications like Facebook, WhatsApp, Twitter, Gmail and many more
+ Social sharing has been added. Now you can share your text, links, images on your favorite social sites like Facebook, twitter, tumblr etc.
+ Transfer file links to and from computer in Wi+Fi network
+ Send file links as email attachments

Downloader Media Player Features
+ Music audio playback of .aac, .mp3, and .m4a formats
+ Video playback of .m4v, .mp4, and .mov formats
+ Playlists has been added for both Music and Movie player
+ Ability to play all MP3 files in a folder like a playlist
+ Repeat and shuffle songs
+ Audio playback continues with the screen locked
+ Playlist support
+ Display album artwork embedded in .mp3
+ Background audio
+ Alternative Downloader options making downloading easier than ever

Whats New

Version 4.00 includes a completely renewed modern user interface with tabbed browsing support, built in media player and simple efficient download management.

Current Version

4.18

Requires Android

2.1 and up

 

Read More..

The U.S. Cellular subscribers of Samsung Galaxy S4 (SCH-R970) has started receiving Android 4.3 Jelly Bean update with firmware build number R970TYUEMJA. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (U.S. Cellular) SCH-R970 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the U.S. Cellular version of Samsung Galaxy S4 (SCH-R970). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 (U.S. Cellular) SCH-R970 (CF-Auto-Root-jflteusc-jflteusc-schr970.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (U.S. Cellular) SCH-R970 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflteusc-jflteusc-schr970.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (U.S. Cellular) SCH-R970 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More..

Description
Do you like to drive something bigger? Car parking is easy, try the big bus parking. Smooth controls, realistic vehicle physics and challenging parking missions.

Test your real driving and parking skills.
- Please support us so we can add more levels.
- More levels are coming.
- As a thank you to all we have integrated "Pocket Change". Now you can earn tokens while playing the game then spend them on cool stuff.

if you need help please search for "Bus parking 3d" on youtube. Or click below:
http://www.youtube.com/results?search_query=bus+parking+3d&oq=bus+parking

IMPORTANT: PLEASE READ BEFORE DOWNLOAD AND RATE!

This game does NOT support:
Samsung Galaxy Y, Samsung Galaxy Pocket, Samsung GT-S5360, Huawei U8650-1

2. This game contains push ads. Please read the user agreement while installing the game.
Thank you all very much!

Whats New
1.4.7
- 2 new levels.
1.4.4
- An acceleration bug in levels 50-55 has been fixed.
1.4.2
- 3 new levels.
1.4.1
- a minor bug fix.
1.4.0
- 2 new levels.
1.3.8
- Some annoying banner and pop-up ads has been removed.
1.3.7
- Performance fix.

Apps Details
-Price: Free
-Version: 1.4.8
-Size: 16 MB
-Required android: 2.2 and Up
-Developer: Riv3r

Instruction:
-Install Apk
-Launch the App

This game does NOT support:
Samsung Galaxy Y, Samsung Galaxy Pocket, Samsung GT-S5360, Huawei U8650-1

Google Play Store : Visit Now

Check New version : Check Now

NOTE: Please report us by comment if there is Broken Link or Image

Have Request or Problem with game. Just Comment..!!
Thanx for your visit..Take around and see another games or application for your Android Divice. Dont forget to sharing my little blog to your friends on facebook, Twitter and etc. Come back tomorrow and see new application and amazing games on www.droapk.net for you !

28 Jul, 2013

-
Source: http://feedproxy.google.com/~r/Droapk/~3/E8zUFB_dxjk/bus-parking-3d-apk-148-direct-link.html
--
Manage subscription | Powered by rssforward.com

Read More..

Samsung has released its latest official Android 4.1.2 Jelly Bean update firmware for the Sprint subscribers of Galaxy S3 with model number SPH-L710. The firmware is now available as Over-The-Air (OTA) update for the users.

Samsung Galaxy S3 (Sprint) SPH-L710 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S3 on the computer.
2) Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the tablet is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root (Mirror Link) for Galaxy S3 (Sprint) SPH-L710 (CF-Auto-Root-d2spr-d2spr-sphl710.zip)
2. Odin 3.07

Steps to Root Galaxy S3 (Sprint) SPH-L710 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Run Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Description
Major update with New Feature - A Fast-Action Fun BLITZ MODE! Its a brand new game within the game.

★ "Appxplore brings us yet another fun and addicting puzzle game that is unique to any other." - GameDynamo, EDITORS CHOICE!
★ "Alien Hive looks and feels like the best puzzle game Ive played in a very long time... Its brilliant, addictive, and endlessly fun." - Arcade Sushi, 9/10 Stars!
★ "A extremely addictive and surprisingly original title in the overly-crowded match-three puzzle genre. It combines block swapping with monster-collection and breeding. Well worth your time and your IAP money!" - LittleAppPreview, Score: 9/10
★ Its a winning combination, with an almost perfect relaxation-to-robot ratio - KOTAKU
★ It is definite must have for your Android gaming collection. - Android Shock

Alien Hive is all about evolving aliens, blending match-3 with sliding tile puzzles for a game that feels both familiar and fresh. Swipe tiles to make matches – combine eggs to hatch cute baby aliens, and then help them fully evolve into Supreme Aliens.
Match resource tiles for upgrades that let you take command of the board, with the goal of building the ultimate alien hive. Strategically avoid the Naughty Bots, who block your progress, by crafting power-ups to eliminate these baddies. As you advance, you will uncover the mystery of the hidden aliens… and tame the Red Planet!

Alien Hive Features:
✔ Evolving-aliens puzzle gameplay: hybrid of match-3 and sliding tile puzzles… its a whole new type of puzzling fun
✔ Match tiles to harvest resources, grow new species of aliens and zap the villainous Naughty Bots
✔ Chill out: pastel graphics and mellow soundtrack, with no time limit to harsh the vibe
✔ Advance the alien society: collect and unleash dozens of Supreme Aliens
✔ 70 Achievements to suit all styles of play
✔ 14 New Achievements for Blitz Mode
✔ Auto save game progress
✔ High Score and Achievements sharing on Facebook
✔ Free to play universal app for Android
✔ Scoreloop support on Android

If you face any technical issue on your device, appreciate if you can contact us prior to writing negative review. We will try to address the issue as soon as possible.
For the latest news, updates, and events LIKE us on Facebook.

Facebook
http://www.facebook.com/appxplore

Apps Details
-Price: Free
-Version: 2.4.0
-Size: 41 MB
-Required android: 2.3 and Up
-Developer: Appxplore Sdn Bhd

Instruction:
-Install Apk
-Launch the App

Google Play Store : Visit Now

Check New version : Check Now

NOTE: Please report us by comment if there is Broken Link or Image

Have Request or Problem with game. Just Comment..!!
Thanx for your visit..Take around and see another games or application for your Android Divice. Dont forget to sharing my little blog to your friends on facebook, Twitter and etc. Come back tomorrow and see new application and amazing games on www.droapk.net for you !

26 Jul, 2013

-
Source: http://feedproxy.google.com/~r/Droapk/~3/BKVG5CdV4Rs/alien-hive-apk-240-direct-link.html
--
Manage subscription | Powered by rssforward.com

Read More..

The International version of Samsung Galaxy S3 with model number GT-I9300 has received Android 4.3 Jelly Bean update firmware. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S3 I9300 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the international version of Samsung Galaxy S3 (GT-I9300). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 I9300 (CF-Auto-Root-m0-m0xx-gti9300.zip)
2. Odin 3.07

Steps to Root Galaxy S3 I9300 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 I9300 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

The LTE version of Samsung Galaxy S4 with model number GT-I9500 has officially received the Android 4.3 Jelly Bean update. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 I9505 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505 (CF-Auto-Root-jflte-jfltexx-gti9505.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Samsung has just started to roll out a new software update based on Android 4.1.2 Jelly Bean with firmware build number I8160XXMF2 for the Southeast Asian owners of Samsung Galaxy Ace 2 with model number I8160.

Firmware details
PDA: I8160XXMF2
CSC: I8160OLBMF1
MODEM: I8160XXMF2
Version: Android 4.1.2
Built date: Jun 14, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES. However, those who missed the OTA update notification or unable to access the update over Samsung KIES can download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Driver for Samsung Galaxy Ace 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Ace 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.1.2 XXMF2 Jelly Bean firmware is compatible only with Samsung Galaxy Ace 2 I8160. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 2 by navigating to Settings >> About Phone.

File Required
1. Android 4.1.2 XXMF2 Jelly Bean Firmware for Samsung Galaxy Ace 2 I8160
2. Odin 3.07

Steps to Update Galaxy Ace 2 I8160 with Android 4.1.2 XXMF2 Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Choose the following files in Odin from extracted I8160XXMF2 firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Ace 2 I8160 should be now updated with official Android 4.1.2 XXMF2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Ace 2 I8160 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

GLASS APEX /NOVA /GO /SMART THEME 6.4 APK
Requirements: Android 2.2 and up

Size: 36 MB

Rating: 4.9/5
Type: Personalization


App Review:

★ User reviews from the Play Store: ★ 
"Absolutely The Best Just love the look of The Glass Icons on my Galaxy S3. Regular updates from the dev make this icon pack fresh and current. Dev is great to deal with and has updated dozen of icons per my request. One of my best purchases in G Play. Thanks Samer!" --Dave L

"Absolutely Delightful ......!!! A kickass theme , absolutely brilliant...Nearly ever possible icon changes !! I would like to make just one suggestion , please create a better (light colored) icon for "settings" (if possible)..... 5 stars all the way ..!!! " --Aniket Khandekar

"Excellent Beautiful goes well with a lot of wallpapers.1 of my favorite packs.Flawless." --Brandon Feldmeier

"Still the best theme. I would only carry a theme for a day or two and then switch out. This theme I have had for six months now. It is super clean and aesthetics straight across the board." --Jeff Robertson

DESCRIPTION:
An amazing glass theme to use with your favorite launchers.

FEATURES:  
★ MULTI LAUNCHERS SUPPORT APEX/NOVA/ADW/GO/ACTION/SMART/HOLO
★ 1300+ OF HIGH QUALITY GLASS ICONS
★ WEEKLY UPDATES
★ GLASS DOCK (ONLY APEX)
★ HD WALLPAPERS
★ NEW THEME FONT

Installation Apex Launcher :
- Install Apex Launcher (Free or Pro)
- Install theme
- Open Apex Settings
- Open Theme Settings
- Select and Apply Glass Theme

Installation GO Launcher :
- Please Do Not open directly after it’s installed.
- Back to GO Launcher EX: MENU > theme preferences.
- Select and Apply Glass Theme

Installation Nova Launcher :
- Open Nova Settings
- Open Look And Feel Settings
- Select and Apply Glass Theme from Iconpack

What’s new in version 6.4
★ADDED PLAY GAMES & RIPTIDE 2 ICONS
★FIXED ICONS ACTIVITIES

Screenshots (click to enlarge)

GLASS APEX /NOVA /GO /SMART THEME 6.4 Download Links:
Download putlocker
Download [Mirror 1] Zippyshare
Download [Mirror 2] Sharebeast
Download [Mirror 3] MirrorCreator
Download [Mirror 4] Multiupload

Read More..

Thank you for using rssforward.com! This service has been made possible by all our customers. In order to provide a sustainable, best of the breed RSS to Email experience, weve chosen to keep this as a paid subscription service. If you are satisfied with your free trial, please sign-up today. Subscriptions without a plan would soon be removed. Thank you!

Description
High-end, immersive tablet gameplay!
Lead the charge on D-Day as the tip of the spear in the largest Allied invasion of WW2! Defeat the occupation forces and take back France; storm the beaches, clear the trenches and liberate towns as you battle through the countryside of Normandy.

SEE AND FEEL THE ACTION!
Experience the ultimate 3rd person shooter with stunning console quality visuals, precise controls, advanced physics, destructible environments and full voiceovers. Jump into the heat of battle and push your device to the limit!

HUGE SINGLE-PLAYER CAMPAIGN!
Experience 5 separate campaigns with 145 separate missions based on the actual beach landings; Juno, Sword, Utah, Gold and Omaha. Destroy powerful tanks and cannons to allow allied forces to advance. Grab a stationary gun and unload against fortified positions. Man the Ack-Ack anti-aircraft guns to take down bombers and their escorts before they can release their payloads.

RUN THROUGH THE WARZONE!
Battle your way into the heart of enemy territory! Run through the battlefield dodging mines and leaping barriers as you move to the next cover point to avoid enemy fire. Emerge from destructible cover points to engage waves of enemies!

COMMAND AN ARSENAL OF DEADLY WEAPONS!
Take to the frontline with an array of classic weapons from World War 2. Grab a historic rifle to take down enemies accurately or, if you prefer, a machine-gun to unleash a hail of bullets. Call in Artillery strikes against entrenched enemy soldiers or shoulder a bazooka to reduce a tank to rubble.

Frontline Commando: D-Day is free to play, but you can choose to pay real money for some extra items.
Use of this application is governed by Glu Mobiles Terms of Use. Collection and use of personal data are subject to Glu Mobiles Privacy Policy. Both policies are available at www.glu.com. Additional terms may also apply.

Apps Details
-Price: Free
-Version: 1.4.0
-Size: 17 (276) MB
-Required android: 2.0.1 and Up
-Developer: Glu Mobile

Instruction:
-Put data on SDCardandroidobbcom.glu.flcn_new
-Install Apk
-Launch the App

Google Play Store : Visit Now

Check New version : Check Now

Click here to Free Download

NOTE: Please report us by comment if there is Broken Link or Image

Have Request or Problem with game. Just Comment..!!
Thanx for your visit..Take around and see another games or application for your Android Divice. Dont forget to sharing my little blog to your friends on facebook, Twitter and etc. Come back tomorrow and see new application and amazing games on www.droapk.net for you !

29 Jul, 2013

-
Source: http://feedproxy.google.com/~r/Droapk/~3/__gw5BDOvAc/frontline-commando-d-day-apk-data-140.html
--
Manage subscription | Powered by rssforward.com

Read More..

full HD game in less memory size and it requires less memory and ram so you can play this game in every android mobile.

Read More..

Google has released the official Android 4.3 Jelly Bean update for the Google Play Edition of the Samsung Galaxy S4 (GT-I9505G).

Samsung Galaxy S4 I9505G users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505G. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505G (CF-Auto-Root-jgedlte-jgedlteue-gti9505g.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505G Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jgedlte-jgedlteue-gti9505g.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505G running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Samsung has just started rolling out the Android 4.3 Jelly Bean update with firmware build number I337MVLUEMK6 for the Canadian version of the Galaxy S4 (SGH-I337M) - Rogers, Bell, Telus, Virgin Mobile, Koodo, Fido, SaskTel. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (Canadian) SGH-I337M users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Canadian version of the Galaxy S4 with model number SGH-I337M. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy S4 (Canadian) SGH-I337M (CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (Canadian) SGH-I337M Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select theCF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 (Canadian) SGH-I337M running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Thank you for using rssforward.com! This service has been made possible by all our customers. In order to provide a sustainable, best of the breed RSS to Email experience, weve chosen to keep this as a paid subscription service. If you are satisfied with your free trial, please sign-up today. Subscriptions without a plan would soon be removed. Thank you!

Description
Available NOW on Selected Android Devices
• A WiFi connection is highly recommended for downloading this game.
• Due to the size of the game, please ensure you have more than 1GB of storage space available and expect longer than usual downloading time.
• Be sure to check the list below to see if your device is compatible.
The following devices are compatible with this game:
HTC Evo 4g
HTC Incredible 4g
HTC One X+
HTC One X (Tegra Version)
LG Nitro HD
Motorola Droid 3
Motorola Atrix 4g
Motorola Photon Q 4g
Samsung Galaxy Nexus
Samsung Galaxy SII
Samsung Galaxy SIII
Samsung Galaxy Note
Samsung Galaxy Tab 7.7
Asus Nexus 7
Asus Transformer Tablet

For up to the minute updates, ""Like"" us on the Official Marvel XP fan page at www.facebook.com/MarvelXP.
Level up, gear up, and fight as Hulk in his first adventure built exclusively for touch screen devices. Track down and defeat some of the worlds most notorious villains like Wendigo, Abomination, The Kronan, and The Skrulls, and help THE AVENGERS pull the world back from the brink of catastrophe!

In the wake of The Pulse, The Vault, a top‐secret S.H.I.E.L.D. facility in the Rocky Mountains, has busted open, releasing all of the super‐powered criminals and monsters imprisoned there. Aboard the S.H.I.E.L.D. Helicarrier, Nick Fury recruits a reluctant HULK to round up all the monsters he can while S.H.I.E.L.D. can assemble the rest of THE AVENGERS to figure out who opened the doors to The Vault‐ and why.

VISCERAL COMBAT
Experience raw, SUPER‐POWERED COMBAT with blazingly responsive swipe, attack, and combo controls in a complete gesture based action game.

STUNNING HD VISUALS
Battle huge BOSS‐SIZED enemies amazing special effects, and incredible set pieces.

UNIQUE CUSTOMIZATION
FULLY CUSTOMIZE Hulk to play the way you want to play. Acquire exclusive costumes, unlock incredible super‐powered abilities, discover explosive augmentations, and upgrade all of Hulks combat stats.

EPISODIC CONTENT
Marvels CROSS‐OVER MOBILE GAMING EVENT continues with updates, scheduled events, and anticipated character reveals, setting a new standard for mobile gaming.

MARVEL XP
Now featured in Avengers Initiative and newly optimized for touch screen devices, Marvel XP is a FREE LIVE SERVICE that TRACKS YOUR PROGRESS, REWARDS YOUR ACHIEVEMENTS, and helps you experience Marvel on a whole new level across multiple games, including Avengers Alliance on Facebook. REGISTER NOW and unlock achievement badges, character dossiers, and other bonus content exclusive to the Marvel XP community.

MORE AVENGERS
Check out our latest free-to-play app AVENGERS ALLIANCE – recruit your favorite Marvel Heroes, and team up with the Avengers, Spider-Man, the X-Men, and S.H.I.E.L.D. to harness the potential of a mysterious power source before Dr. Doom, Loki, and the worlds most dangerous villains beat you to it.

ENHANCED FOR NVIDIA TEGRA DEVICES
If youre the owner of an NVIDIA Tegra Super Phone or Tablet, experience added TegraZone game enhancements including: Improved character textures, realistic clothing, life-like environments, and Iso-8 effects."

Apps Details
-Price: $1.99
-Version: 1.0.4
-Size: 1.3 GB
-Required android: 4.0 and Up
-Developer: Marvel Games

Instruction:
-Put data on SDCardandroidobbcom.disney.avengers_goo
-Install Apk
-Launch the App

Modify:
-Game Review of all resources and props to infinite.

Google Play Store : Visit Now

Check New version : Check Now

NOTE: Please report us by comment if there is Broken Link or Image

Have Request or Problem with game. Just Comment..!!
Thanx for your visit..Take around and see another games or application for your Android Divice. Dont forget to sharing my little blog to your friends on facebook, Twitter and etc. Come back tomorrow and see new application and amazing games on www.droapk.net for you !

31 Jul, 2013

-
Source: http://feedproxy.google.com/~r/Droapk/~3/DUs2bdpzFiM/avengers-initiative-apk-data-104-direct.html
--
Manage subscription | Powered by rssforward.com

Read More..

new jelly bean 4.3 3D interface with floating widgets for your android mobiles. with HD graphics. this will work on both mobiles and tabs. its not a simple app its a live wallpaper which looks like as android jelly bean 4.3. your all apps will look 3D and floating like jelly bean 4.3.

so enjoy jelly bean 4.3 interface on your android mobile without any custom rom or any modifications. just install this app and set as wallpaper. and done. in this app some modifications are done to ensure to not eat more battery. so this will increase battery life time of your mobile.

features :

• nexus like floating widgets.
• IOS7 like feel
• enhanced performance by using buffer memory.
• adjustabe.

Read More..