A new software update based on Android 4.2.2 Jelly Bean with firmware build number I9500XXUBMG9 has been rolled out on Samsung Galaxy S4 with model number GT-I9500.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XXUBMG9 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 XXUBMG9 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 XXUBMG9 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

You interested in changed the theme galaxy y phone and you like look in a new style on your galaxy y phone. Install New theme on your phone, Menu Icon, Menu style, Clock,Widget, Color, etc....changed new look.
You can easily changed the theme on your phone.

You can get themes  free by using google play store. you can follow the easy steps below to configure  your android phone.

This the step you can follow

•  : Go to menu > Select play store > select search icon
• : Type GO Launcher > Select GO launcher EX
• : Select Install icon > Accept &download
• : Select open  > now your themes changed .

Do you want Select other themes, or changed settings add widgets press HOME icon you can see list select what do you want changed.

Now you can get in google play store any themes download  and install. Ex. Go play store type samsung galaxy s 3 theme you can download and install theme free.

Read More..

Galaxy on Fire 2™ Xperia PLAY l Version: 1.0.4.9 | Size: 168.73MB
Developers: FISHLABS Entertainment GmbH | Language: English

***
EXCLUSIVELY FOR SONY ERICSSON’S XPERIA PLAY: GALAXY ON FIRE 2 FOR FREE & THE VALKYRIE ADD-ON FINALLY ON ANDROID!
***
Catapulted into a war-torn future, dare-devil space adventurer Keith T. Maxwell finds the galaxy at the mercy of a powerful alien race. Uncovering the truth about this dangerous species, he boldly takes the fight to their doorstep. Join Keith in an intergalactic trek of exploration, pirates, space battles, weird aliens and romance.
STORY
After battling the Vossk in the original Galaxy on Fire™, a hyperdrive malfunction sends Keith T. Maxwell through space and time. Awakening 35-years later at the far end of the galaxy, where a devious alien species is wreaking destructive havoc on the warring races occupying this volatile sector of space.
Despite his efforts to return home, Keith is drawn into a plot to investigate and stop this alien menace. Along the way he must fight, trade, explore and negotiate as he uncovers the truth about this powerful enemy, and ultimately find his way home.
Old friends and new enemies join forces as Keith takes command of a dangerous, intergalactic mission to fly deep into enemy space and bring the war to an explosive conclusion.
VALKYRIE – EXCITING NEW ADD-ON ADVENTURE
Setting out to find the perpetrator of the mysterious Valkyrie conspiracy, Keith finds himself drawn into the darkest and most remote corners of the galaxy, running into the devious space trader Mkkt Bkkt, flying new Vossk spaceships, encountering the secretive Deep Science faction and even buying his own space bar!
Join Keith on his latest adventure by updating Galaxy on Fire 2 to its newest version and downloading the exciting new Valkyrie add-on pack through an in-app purchase of just US $4.99/ €3.99/£2.99.
GAMEPLAY
Featuring a living galaxy with over 20 inhabited solar systems and 100 space stations, Galaxy on Fire 2 allows you to travel using hyperspace and wormholes to visit the far reaches of this fully 3D, war-torn galaxy.
Follow the rich and engrossing storyline for over 10-hours of action-packed gameplay, or head off at any time on an interplanetary journey of your own design; mining asteroids, trading ore and supplies, taking on mercenary missions, working as a pirate and manufacturing new weapons and equipment.
Buy and customize more than 30 different types of space ship to aid you in a variety of heart-pounding missions, including escorting convoys under pirate attack, capturing intergalactic criminals, rescuing alien VIPs, transporting valuable goods between systems, commanding mercenaries on dangerous tactical assignment, and recovering alien technology from distant parts of the galaxy.
FEATURES OF GALAXY ON FIRE 2 FOR XPERIA™ PLAY:
• High quality visuals and gameplay, as well as full support of the PlayStation™-certified controls of Sony Ericsson’s Xperia™ PLAY
• Full (English) voice acting and 3D sound
• A living galaxy with 20+ solar systems, 100+ unique 3D space stations and 30+ customizable ships
• Unique reputation and diplomacy system
• Story-based, mission-based and free gameplay
• Complex trading system with 170+ different commodities
• Action Freeze™: 3D screenshot tool to save screenshots from any perspective and upload them to Facebook™
SPECIAL FEATURES OF THE VALKYRIE ADD-ON:
• New storyline complete with English voiceover
• New Vossk and Deep Science spaceships
• New weapons and equipment, including guided missiles, mines, auto-turrets, repair robots and shields
• Black market trading system
• Nine new planets across four new solar systems
• Buy your own space station, the infamous Kaamo Club, formerly owned by Mkkt Bkkt
GALAXY ON FIRE 2™ - IN THE PRESS:
"Must have! Galaxy on Fire 2 is a supernova."
Slidetoplay.com - 10/10
"Galaxy On Fire 2 is a game that pushes the format further than ever before."
Appgamer.net - 9/10
“Galaxy on Fire 2 is a huge game… there really isn’t a more complete space game in the App Store.”
148Apps.com – 4.5/5

Read More..

The U.S. Cellular subscribers of Samsung Galaxy S4 (SCH-R970) has started receiving Android 4.3 Jelly Bean update with firmware build number R970TYUEMJA. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (U.S. Cellular) SCH-R970 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the U.S. Cellular version of Samsung Galaxy S4 (SCH-R970). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 (U.S. Cellular) SCH-R970 (CF-Auto-Root-jflteusc-jflteusc-schr970.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (U.S. Cellular) SCH-R970 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflteusc-jflteusc-schr970.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (U.S. Cellular) SCH-R970 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More..

Samsung has released its latest official Android 4.1.2 Jelly Bean update firmware for the Sprint subscribers of Galaxy S3 with model number SPH-L710. The firmware is now available as Over-The-Air (OTA) update for the users.

Samsung Galaxy S3 (Sprint) SPH-L710 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S3 on the computer.
2) Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the tablet is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root (Mirror Link) for Galaxy S3 (Sprint) SPH-L710 (CF-Auto-Root-d2spr-d2spr-sphl710.zip)
2. Odin 3.07

Steps to Root Galaxy S3 (Sprint) SPH-L710 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Run Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

The International version of Samsung Galaxy S3 with model number GT-I9300 has received Android 4.3 Jelly Bean update firmware. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S3 I9300 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the international version of Samsung Galaxy S3 (GT-I9300). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 I9300 (CF-Auto-Root-m0-m0xx-gti9300.zip)
2. Odin 3.07

Steps to Root Galaxy S3 I9300 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 I9300 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

The LTE version of Samsung Galaxy S4 with model number GT-I9500 has officially received the Android 4.3 Jelly Bean update. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 I9505 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505 (CF-Auto-Root-jflte-jfltexx-gti9505.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

( TESTED WITH Dead Trigger 2 Successfully Installed on 6.0.0)

1. First u need a useable Brain and Eyes

2. A Computer that have Winrar Or 7zip

3. Download IPA ( For IOS 7):

EX: Dead Trigger 2, Infinity Blade3, etc

4. Open IPA

5. Find this file: Info.plist

6. Open the file Using Notepad++ ( Google it)

7. It will show nothing first time then back out and open it again.

8. Press Ctrl + F

9. Go to replace and replace all " 7.0" to " 6.0" or " 5.1.1"

10. Save the file and install it using Itunes or Itools.

Read More..

The default keyboard for Huawei Ascend comes with a multitouch, but what if you want to change and install a new keyboard. This is a thing unique to Android platforms because there are numerous keyboard options.

First, you need to install some new keyboards.

There are many different options when it comes to Android keyboards. Play around with all of them and see which one fits you best.
Better Keyboard It will allow you to change and fine-tune the keyboard to make it your own.
 
SwiftKey is another option that provides impressive word prediction, including a feature that predicts the next word you havent even begun to type yet.

Its now ready to switch a new keyboard:
1. Tap the applications launcher

2. Scroll over and tap Settings

3. In the settings menu, scroll down and tap Language & keyboard

Alternate Text
If you have a custom keyboard installed, you will see an option to toggle it on and off with a check box. In order to have it appear as a selection, the box next to your myTouchd keyboard must be checked.

4. Tap on Input method

5. Find the name of the keyboard you want to activate, and tap on it.

Alternate Text

6. Press the Home button
 If you want to test it to make sure it is activated, just press the Search key, and your keyboard will pop up like in the image above.

Read More..

Google has released the official Android 4.3 Jelly Bean update for the Google Play Edition of the Samsung Galaxy S4 (GT-I9505G).

Samsung Galaxy S4 I9505G users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505G. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505G (CF-Auto-Root-jgedlte-jgedlteue-gti9505g.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505G Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jgedlte-jgedlteue-gti9505g.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505G running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Samsung has just started rolling out the Android 4.3 Jelly Bean update with firmware build number I337MVLUEMK6 for the Canadian version of the Galaxy S4 (SGH-I337M) - Rogers, Bell, Telus, Virgin Mobile, Koodo, Fido, SaskTel. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (Canadian) SGH-I337M users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Canadian version of the Galaxy S4 with model number SGH-I337M. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy S4 (Canadian) SGH-I337M (CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (Canadian) SGH-I337M Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select theCF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 (Canadian) SGH-I337M running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Galaxy S4 apps, how do I uninstall thee? Let me count the ways.
Android is an app-driven platform. Everything that you can do on your Galaxy S4 you can achieve by running apps. Some apps (especially system apps) come with your phone straight from the factory, others you install from sources such as the Google Play Store. There’s not much that you can do to remove preinstalled system apps, but — just in case you haven’t gotten round to actually doing it first time — you can actually uninstall user apps and recover storage space.
If you think that the only way to uninstall apps on the Galaxy S4 is through the Google Play Store app, then this article holds a few surprises for you. In this article, you’ll learn how to uninstall apps on the Galaxy S4. There are actually several ways to do it.

Using Google Play Store app

This, of course, is a no-brainer. But, for completeness, let me just include this here. While you can argue that the Uninstall button is hard to miss on a freshly installed app’s page in the Google Play Store app, some people do have the innate ability to overlook that button.
Although not the one and only source, the Google Play Store is the default primary source of apps for most Android users. Its accompanying app allows you to discover and install new apps or remove and uninstall old ones.
App uninstallation via the Play Store app takes only a few steps:

1. open Play Store app,
2. tap on Menu,
3. select My Apps,
4. tap on name of app to be removed, and
5. tap the Uninstall button.

Yup — that easy. Doesn’t take a genius, really.
Take note, however, that if you manually install apps through some other way besides the Play Store, those apps sometimes do not appear on the list in the Play Store app. Such apps can be uninstalled through other means.

Using Application Manager

Besides the Play Store app, Android’s built-in Application Manager can also be used to uninstall apps. Just open the Settings app, tap on the More tab, and select Application Manager.
In Application Manager, you should be able to see a list of your installed apps, organized into four tabs:

• Downloaded — Lists all apps that you downloaded to your phone
• On SD Card — Lists all apps that are installed in your phone’s storage
• Running — Lists all apps that are active or are running in the background
• All — Lists all apps, regardless of source or installation location

To remove an app using the Application Manager, just tap the app’s name on the list to open the app’s info page, then tap the Uninstall button. It’s that easy. You may want to tap the Clear Data and Clear Cache buttons first before hitting Uninstall.

Using TouchWiz UI

App Drawer Edit Mode

If, for some reason, you find the Play Store or Application Manager method a bit long-winded for your app uninstallation pursuits, seek refuge in TouchWiz.
The Samsung TouchWiz interface for the Galaxy S4 comes with a UI-based method for easily uninstalling an app. You can do it in just four steps:

1. Open the App Drawer.
2. Tap Menu.
3. Tap Edit.
4. Hold down and drag the app’s icon to the Uninstall icon at the top-right.

The foregoing method also lets you remove apps that you manually installed.

Alternate UI method

An alternate method for easily uninstalling apps from the App Drawer is as follows:

1. Open the App Drawer.
2. Tap Menu.
3. Tap Uninstall.
4. You’ll see red bars overlayed on the icons of apps that you can uninstall. Just tap on the red bar to uninstall the app.

The foregoing method also lets you remove apps that you manually installed.

Using an app manager app

Yet another way to remove an app from your Galaxy S4 is through the use of app managers, task managers, or file manager / explorer apps. There are several of such apps on the Google Play Store.
ES File Explorer, for example, has an App Manager component that lets you uninstall, backup, share, or send apps. Most remote device management apps such as AirDroid also have app uninstallation features.

Using ADB

If you’re into command-line interaction with your Galaxy S4, then you’ll probably want to learn some uninstallation tricks using the Android Debug Bridge (ADB). For this method to work, you’ll need a working ADB setup on your computer. Also, ADB must be able to recognize your Galaxy S4 when you run the command adb devices at a terminal.
To uninstall an app via ADB, you must know the app’s package name (which is not necessarily the app’s APK file name). If you don’t know the app’s package name, you can quickly summon a list of the names of installed packages on your phone with the following command:
adb shell pm list packages
Here’s an example output of the command above:

Each package name listed is prefixed with package:, but you should be able to easily spot your app’s package name from the list. According to the list, the package name for the Mozilla Firefox app, for example, is org.mozilla.firefox. Once you’ve identified the app’s package name, simply issue the following command:
adb uninstall packagename
where packagename is the app’s package name. So, to uninstall Mozilla Firefox, for example, you’d use the following command:
adb uninstall org.mozilla.firefox

Read More..

How to Remove Default ROM applications on Android Phones

Are you wondering how to remove an application that has been bundling with congenital ROM that you install on an Android phone? Take it easy, because on this occasion I will discuss about it, How to Remove Default ROM applications on Android phones?

Perhaps you are tired of looking at applications that are not useful in our part of the Android menu, or you do not know the function of the menu? Surely you will remove the application, but do not know how to Delete Applications are? Or would you even let menu of the application remains on the menu your Android phone? That will make your Android phone to be wasteful of memory. We better remove the application by following the steps - the steps below:

1. Prepare rootex (Root Explorer) as a tool of our time fighting this. If you do not already have it, please download here and then install.
2. Then open the application rootex already was installed.
3. Go to the directory system / app / (this is the application). Do not remove all of it? Delete that you think are not necessary.
4. If you can not remove it and display a warning “….apk cannot be deleted because the file system is read-only”, do not panic. Navigate your views into the upper right corner and click the box that says Mount R / O to Mount R / W.
5. Then repeat the process of elimination.
6. Click Yes to remove it. Completed.
7. Reboot to see changes.

Easy is not it? Using only one application we can remove all the applications on our Android phones. But do not remove all, if cleared of all or any of the deletion could be your Android phone will be the error. So please be careful.

Note: Any damage caused is your own responsibility, and is not my responsibility. So please be - careful

Read More..

The Exynos 5 octa-core variant of Samsung Galaxy S4 (GT-I9500) has received a new software update with firmware build number I9500XWUBMG5. The new software update is still based on Android 4.2.2 Jelly Bean version and now available in India, Nepal, Sri Lanka, and Bangladesh.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XWUBMG5 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 XWUBMG5 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 XWUBMG5 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

This just a simple tips on how to set a different ringtones on you Samsung Galaxy Gio. If you already downloaded your favorite MP3 songs on your PC and want to transfer it in your Galaxy and customize at as your personal message or alert tones,  all you have to do is connect your Samsung Galaxy Gio to your computer or laptop via USB cable and then select "connection type" and get access to storage memory card.

Heres how to connect Galaxy Gio into Mass Storage Mode Option:

- On Main Home Screen tap Menu > Settings > Application
- Enable USB Debugging
- Return to Home Screen
- Then plug the USB cable into your Galaxy S2
- Pull down status bar
- Press Connect USB Storage button

Alternative way without USB Debugging
- Go to Settings > Wireless & Network
- USB utilities and click the button >
- then plug in USB cable

Once youve establish a connection from you Galaxy Gio to your PC, just browse to your mass storage
then find the folder "Notifications", if its not on there, create a new folder and simply renamed it "Notifications".

>SDCARD/ MEDIA/ AUDIO/ NOTIFICATIONS

Then grab a copy music files you wanted from your computer and paste into that folder "Notifications". Once finishes, disconnect your Galaxy Gio from the computer. Then you can set that music files as your message tone.

- Go to Message/Inbox icon located at the bottom of your Samsung Galaxy Gio screen

- In the Message/Inbox Settings simply choose the file that youve copied as your message ringtone

If you already have a music files stored on your Samsung Galaxy Gio S5660, do this steps below:
- Go to "My Files" then copy that mp3 music file you like to use as your messages ringtone.
( Just tap and hold that music file then you can choose either to copy or move that music file)
- Next, paste that music file in your media folder > SDCARD/ MEDIA/ AUDIO/ NOTIFICATIONS
- Go to Message/Inbox icon located at the bottom of your Samsung Galaxy Ace screen

- In the Message/Inbox Settings simply choose the music file that youve copied as your message ringtone
If you have a problem about the volume loudness, this sometimes happens that your custom ringtone volume is too low compared to the pre-installed ringtone on your Galaxy Gio which as much louder.
You can try using this program, MP3GAIN, to boost up maximized the volume of your mp3s decibels.
http://mp3gain.sourceforge.net/download.php

Or this app from Android Market..Volume+ (Sound Boost)
currently using this app for my boosted up mp3s using MP3GAIN.
But works only on Gingerbread..
https://market.android.com/details?id=com.TEST.android.lvh&feature=search_result

Read More..