A new software update based on Android 4.2.2 Jelly Bean with firmware build number I9500XXUBMG9 has been rolled out on Samsung Galaxy S4 with model number GT-I9500.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XXUBMG9 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 XXUBMG9 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 XXUBMG9 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

You interested in changed the theme galaxy y phone and you like look in a new style on your galaxy y phone. Install New theme on your phone, Menu Icon, Menu style, Clock,Widget, Color, etc....changed new look.
You can easily changed the theme on your phone.

You can get themes  free by using google play store. you can follow the easy steps below to configure  your android phone.

This the step you can follow

•  : Go to menu > Select play store > select search icon
• : Type GO Launcher > Select GO launcher EX
• : Select Install icon > Accept &download
• : Select open  > now your themes changed .

Do you want Select other themes, or changed settings add widgets press HOME icon you can see list select what do you want changed.

Now you can get in google play store any themes download  and install. Ex. Go play store type samsung galaxy s 3 theme you can download and install theme free.

Read More..

The U.S. Cellular subscribers of Samsung Galaxy S4 (SCH-R970) has started receiving Android 4.3 Jelly Bean update with firmware build number R970TYUEMJA. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (U.S. Cellular) SCH-R970 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the U.S. Cellular version of Samsung Galaxy S4 (SCH-R970). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 (U.S. Cellular) SCH-R970 (CF-Auto-Root-jflteusc-jflteusc-schr970.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (U.S. Cellular) SCH-R970 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflteusc-jflteusc-schr970.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (U.S. Cellular) SCH-R970 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More..

Description
# Featured as a "Play Pick" by Google Play! Already a top ranked game in over 100 countries in the first week of release!

Recommended for newer devices due to 3D graphics.
Forget 9 lives, youll need 50 Ways to Survive in this brand new level-based platformer for Android phones and tablets! Inspired by the global hit song "50 Ways to Say Goodbye" by Train. Save Pats girlfriend from the evil clutches of Grimmy and his horde of minions and bosses in each chapter. Play though 36 levels in several dazzling environments.

Train proudly donate proceeds from sales of "50 Ways to Survive" to support Family House, a non-profit organization proving temporary housing to families of seriously ill children receiving treatment at the University of California San Francisco Benioff Childrens Hospital.

- AppAdvice says: "The game by itself is a great game to play. The levels are challenging, and you could easily be entertained for hours. The charity work behind the app just gives it an extra layer of awesomeness".

- ArcadeSushi calls 50 Ways to Survive an "exciting new platformer".

- AppsZoom says 50 Ways is "...a fun and entertaining game...graphics and animations have been done with care, and playability is outstanding."

- WQAD / ABC News on Mass Threat "...creating hit after hit"

- CBS Radio - "Very cool idea and very fun game"

You can play through maniacally fast or go for the perfect score by collecting every crown on each level and acquire all 30 achievements! And no, you dont need to buy anything to win this game, but you can to become completely invincible and unstoppable like Grimmy thinks he is for just a few mere crowns.
Its endless fun, for free!

Features:
- Launched with 36 total levels: and yes, more levels already on the way! We will never sleep again.
- Controls so simple a lion would rave about them.
- 6 playable characters - even play at as Grimmy, the games villain!
- Find powerups (and sometimes pocket lint) for free along the way and cash in your crowns too. Get our bribe of 1000 crowns just by playing the first time.
- Brazen boss battles at the end of each beautiful chapter - a bonanza!
- Under 50 megabytes so download it anywhere, anytime!
- Tablet support!

Apps Details
-Price: Free
-Version: 1.1
-Size: 26 MB
-Required android: 2.3 and Up
-Developer: Mass Threat

Instruction:
-Install Apk
-Launch the App

Google Play Store : Visit Now

Check New version : Check Now

NOTE: Please report us by comment if there is Broken Link or Image

Have Request or Problem with game. Just Comment..!!
Thanx for your visit..Take around and see another games or application for your Android Divice. Dont forget to sharing my little blog to your friends on facebook, Twitter and etc. Come back tomorrow and see new application and amazing games on www.droapk.net for you !

26 Jul, 2013

-
Source: http://feedproxy.google.com/~r/Droapk/~3/brmFrKy4YG8/50-ways-to-survive-apk-11-direct-link.html
--
Manage subscription | Powered by rssforward.com

Read More..

How To Upgrade OS Android Samsung Galaxy Fit from Froyo to Gingerbread?

Since you do not understand everything about how to upgrade the OS to Android, the post I will discuss on How to Upgrade OS Android Samsung Galaxy Fit from Froyo to Gingerbread?

What is OS? OS is an Operating System that is used on a device, such as Android we are discussing today. In addition to Android there are also Windows, Linux, etc. that I can not mention one by one. Well, but is it possible for us to upgrade it? Whats own upgrade? Upgrade is a step in which we will enhance the ability of the OS we are using today to a newer operating sysytem, in this case I upgrade from OS Froyo to Gingerbread for Samsung Galaxy Fit S5670.

Steps Upgrade OS Android Samsung Galaxy Fit from Froyo to Gingerbread:
1. Prepare in advance the tools we need. As ODIN Multidownloader, File .ops, and firmware that we use.
2. If you do not already have it, please download ODIN Multidownloader and file .Ops for Samsung Galaxy Fit here
(for file .opsnya different for each devices). For the firmware you can find yourself well. Here I only explain a few steps alone.
3. After you download all the equipment, first open your Multidownloader ODIN. Then insert the file .Ops in place, and check One Package (if you use the One Package, if not leave it alone).
4. Then Enter the firmware into place, (File firmware berkestensi. Tar, if still in the first extract rar please.)
5. Then once everything is ready, plug the phone.
Download your favorite Android in by pressing the Mode Down, Home, Power simultaneously. After appearing in yellow on the upper left Multidownloader ODIN and it was a sign already detect it, please click on START
6. Never unplug the cable from your computer, because it would thwart the upgrade process and the risks that occur on their own responsibility.
7. Wait until the process is complete. Highlighted in yellow on the upper left ODIN became blue. Completed.

Read More..

Easy Ways to Boost Performance Android Phone

Have a cell phone or Android tablet is very nice. Various applications can be installed easily and quickly escape. Free too, but after using for a long time, many users who felt Android devices run slower.

As an intelligent device, phone or Android tablet armed by the processor is responsible for maintaining the performance and stability of the device during use, besides of course respond to the commands we give. Then there is also the role of memory (internal) needed to keep a cache of the tasks we have given earlier, the device is easier if we repeat the same command at a later time. Well, usually when the performance of the device begins to seem slow, the second component is to blame.

So how do I fix this? I will give some solutions you can try.

1. Reset Device
For information, applications or games installed Android uses more memory if it is installed. That is, if you download a 10 MB application from the Android Market, then once installed unused memory capacity can be 20 MB or even more.
As a result, HPs performance to be slowed down or even cause HP to hang. When andamengalami full HP memory problems, then here are some tips to overcome them.

Or use the conventional way, ie go into the settings, select the application and management applications. There is usually some local groups such as the application is downloaded, contained in a memory card, which is running, etc.. depending on the device you use. Choose one of the applications currently running. There will be several options such as the Force Stop (Forced off), or Clear Data if your chosen application is a Browser. But remember, some features can not be turned off because it can lead to instability of the device.

Well, because Android phones capable of running multitasking, it is necessary to note also that scattered widgets on your homescreen. The more and animated, then the performance of your device will also be increasingly depleted. So is the use of Live Wallpapers. So, if your device does not have a high specification, consider using only the standard wallpaper.

2. Use Application
There are some applications that can be used to adjust automatically when the memory is on the verge of capacity limits. One is Optimus Root Artificial Memory Optimizer Soapbox Apps. This application aims to improve system performance and battery life by adjusting the internal memory setting Android.

a. Optimus Root Memory Optimizer
Optimus Root Memory Optimizer automatically kills applications running in the background when system memory falls below a certain threshold. That is, the application will free up memory more aggressively thereby increasing system performance. This application provides three different settings are Moderate, Balanced and Extreme.

b. Advanced Task Killer
This application can be quite simple because once you get into it, will be immediately visible applications that are running. Live where you want to mark off, select "KILL selected apps" and OK! This application can also be set to auto start.

c. App 2 SD
One reason the phone is running slow is too many applications installed on internal memory. If you have a large capacity memory card, while your tools can not automatically install on external memory, simply use the application is made ​​by Sam Lu. Transfer applications are installed on the device, but with a note that you use at least Android is Froyo (v2.2).

d. Dr saver + a Task Killer
Applications for performance management and mengkatkan battery on Android. Yes as the name suggests has a function as an application in order to save battery Android. This application has features such as: provide convenience to the user to terminate the application and reset the phone quickly and easily fast. Displays the battery status, including temperature, time to talk and various other battery information. Well, to improve battery performance applications the user must turn off the useless or not being used. There are several options at the end applications that can directly such as management of screen brightness, volume settings, indicator wifi, gps, bluetooth, Auto-sync.

e. ES File Explorer
ES File Explorer is a file manager application that has a proper function for the android phone you have. This application has many functions such as file manager: Copy, Paste, Cut / Move, Create, Delete and Rename, Share / Send. Just like on the computer, set the application as well as backup, compress and Decompress ZIP files, Unpack RAR files, display a variety of photo formats, documents and video, as a media viewer and text editor, search for media files and many others.

However, of those applications that have been described, there is a great way for your hobby person who tinkers their smart devices, namely by doing root. But because it is quite risky, so now I only recommend ways are simple and safe to do. Hopefully useful.

Read More..

Samsung has released its latest official Android 4.1.2 Jelly Bean update firmware for the Sprint subscribers of Galaxy S3 with model number SPH-L710. The firmware is now available as Over-The-Air (OTA) update for the users.

Samsung Galaxy S3 (Sprint) SPH-L710 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S3 on the computer.
2) Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the tablet is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root (Mirror Link) for Galaxy S3 (Sprint) SPH-L710 (CF-Auto-Root-d2spr-d2spr-sphl710.zip)
2. Odin 3.07

Steps to Root Galaxy S3 (Sprint) SPH-L710 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Run Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Do you want to reset your galaxy phone default factory settings.

How to reset.....??????
Go...select... press......press and hold.....type this .......etc....ok

Dont worry. It is simple. I explain how to it works.
Hard reset you phone delete, lose your personal data. First of all charge your phone batter and backup your important, personal data.
Take out your SIM card and SD card.

To reset your phone dial this code   *2767*3855#

Wait until finishing reset and automatically reboot phone. Do not press any buttons, do not touch any place will reset and reboot.
Now your phone is reset default factory settings. This code is work most samsung phones reset.

Read More..

One of the great benefits of using an open operating system like Android is the ability to customize it the way you want. You can change the default font to your favorite one, use a third party launcher and even install a new skin on your device without much trouble.
Android also allows you to select the application that should complete an action for you. Indeed, if there are several applications that can, let’s say, play music files, Android will ask you which one you would rather use, be it for this time or all future files. In this post, we will show you how to select these applications and how to undo this selection to reset your default apps.

Like Us On Facebook 
Picking Your Default Apps
If you have more than just one application on your device that supports a specific file type, you will be prompted to select which one you would like to use to open your file. This choice can be set to be permanent, in which case your device won’t ask you about it anymore, or a one-time selection. The latter simply means you’ll be asked the same question next time you open the same file type.

When several apps can open a file, Android will ask you which one you’d like to use

Let’s take a concrete example: On my Galaxy Note II, Google’s Play Music, Samsung’s Touchwiz Music and ES Music Player can play music files. When I open an audio file, my phone lets me select which application I would rather use to play the file. I have personally chosen not to set a default application, because I manually open the music player when I want to listen to my music, and not the file directly.
Nevertheless, I particularly dislike Samsung’s default Gallery application, which I have replaced with QuickPic. In order to do so, I had to set QuickPic as my default application for photos. Thankfully, the process is particularly easy, as you simply have to select Always after you select the app to open your file, and your device will remember your choice and won’t ask you again.
Similarly, I’ve selected Google Chrome to be my default browser instead of Samsung’s and I also had to tell Android to open all web pages with Chrome. For browsers, you may be prompted several times, as Android will recognize protocols — https:// etc — in addition to file types, which is why you may have to confirm your selection more than just once.

Resetting Your Selection

What happens if you try a new app and end up liking it more than your current browser? You would need to reset the default application before setting the new one as your default browser. The process is fairly simple, but somehow different from the approach you may be used to on your computer. Indeed, while most people are used to having a specific file type being associated to an application, Android associates an application with a file type. In simpler terms, this means that if you want to reset your default browser, you would need to reset the application settings for your current browser. Here’s how to do it:

• Go to your Android Settings
• Select Applications
• Select the application that is currently set to open a file type — for example, Google Chrome
• Scroll down to Launch by default and tap Clear defaults
• You’re all set. Next time you open a web page or an HTML file, you’ll be asked to select your preferred browser.

Be careful, if your app is associated with several file types, they will all be reset. This holds particularly true for media players, as they can play audio and video files.

You can reset the Launch by default settings in the Application Manager

Wrapping Up

Thanks to Android, it’s easy to use several apps and select which one to use when opening a file. This allows for more flexibility, as some applications are more complete but take longer to load. Of course, if you’d like to stick to a single application, you can easily set your device to open a specific file type using that app. In both cases, you can truly customize your system and environment according to your preference and needs.

Read More..

The International version of Samsung Galaxy S3 with model number GT-I9300 has received Android 4.3 Jelly Bean update firmware. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S3 I9300 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the international version of Samsung Galaxy S3 (GT-I9300). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 I9300 (CF-Auto-Root-m0-m0xx-gti9300.zip)
2. Odin 3.07

Steps to Root Galaxy S3 I9300 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 I9300 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

The LTE version of Samsung Galaxy S4 with model number GT-I9500 has officially received the Android 4.3 Jelly Bean update. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 I9505 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505 (CF-Auto-Root-jflte-jfltexx-gti9505.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Samsung has just started to roll out a new software update based on Android 4.1.2 Jelly Bean with firmware build number I8160XXMF2 for the Southeast Asian owners of Samsung Galaxy Ace 2 with model number I8160.

Firmware details
PDA: I8160XXMF2
CSC: I8160OLBMF1
MODEM: I8160XXMF2
Version: Android 4.1.2
Built date: Jun 14, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES. However, those who missed the OTA update notification or unable to access the update over Samsung KIES can download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Driver for Samsung Galaxy Ace 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Ace 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.1.2 XXMF2 Jelly Bean firmware is compatible only with Samsung Galaxy Ace 2 I8160. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 2 by navigating to Settings >> About Phone.

File Required
1. Android 4.1.2 XXMF2 Jelly Bean Firmware for Samsung Galaxy Ace 2 I8160
2. Odin 3.07

Steps to Update Galaxy Ace 2 I8160 with Android 4.1.2 XXMF2 Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Choose the following files in Odin from extracted I8160XXMF2 firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Ace 2 I8160 should be now updated with official Android 4.1.2 XXMF2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Ace 2 I8160 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

In order to use all these Android Secret Codes you just need to simply open the Dialer of your smartphone and type the secret code of which ever function you need to perform out of all these and you are good to go.

Here Is the list of  20 Android Secret Codes for your Smartphone :-

Phone Information, Usage and Battery – *#*#4636#*#*

IMEI Number – *#06#

Enter Service Menu On Newer Phones – *#0*#

Detailed Camera Information – *#*#34971539#*#*

Backup All Media Files – *#*#273282*255*663282*#*#*

Wireless LAN Test – *#*#232339#*#*

Enable Test Mode for Service – *#*#197328640#*#*

Back-light Test – *#*#0842#*#*

Test the Touchscreen – *#*#2664#*#*

Vibration Test – *#*#0842#*#*

FTA Software Version – *#*#1111#*#*

Complete Software and Hardware Info – *#12580*369#

Diagnostic Configuration – *#9090#

USB Logging Control – *#872564#

System Dump Mode – *#9900#

HSDPA/HSUPA Control Menu – *#301279#

View Phone Lock Status – *#7465625#

Reset the Data Partition to Factory State – *#*#7780#*#*

Format Your Device To Factory State(will delete everything on your phone) – *2767*3855#

Hidden Service Menu For Motorola Droid – ##7764726

So these were 20 Android Secret Codes for your Smartphone use them and enjoy playing around with your smartphone, do tell us which one you liked the most below in the comment section and keep stalking for more tweaks for your smartphone.

 

Read More..

( TESTED WITH Dead Trigger 2 Successfully Installed on 6.0.0)

1. First u need a useable Brain and Eyes

2. A Computer that have Winrar Or 7zip

3. Download IPA ( For IOS 7):

EX: Dead Trigger 2, Infinity Blade3, etc

4. Open IPA

5. Find this file: Info.plist

6. Open the file Using Notepad++ ( Google it)

7. It will show nothing first time then back out and open it again.

8. Press Ctrl + F

9. Go to replace and replace all " 7.0" to " 6.0" or " 5.1.1"

10. Save the file and install it using Itunes or Itools.

Read More..

The default keyboard for Huawei Ascend comes with a multitouch, but what if you want to change and install a new keyboard. This is a thing unique to Android platforms because there are numerous keyboard options.

First, you need to install some new keyboards.

There are many different options when it comes to Android keyboards. Play around with all of them and see which one fits you best.
Better Keyboard It will allow you to change and fine-tune the keyboard to make it your own.
 
SwiftKey is another option that provides impressive word prediction, including a feature that predicts the next word you havent even begun to type yet.

Its now ready to switch a new keyboard:
1. Tap the applications launcher

2. Scroll over and tap Settings

3. In the settings menu, scroll down and tap Language & keyboard

Alternate Text
If you have a custom keyboard installed, you will see an option to toggle it on and off with a check box. In order to have it appear as a selection, the box next to your myTouchd keyboard must be checked.

4. Tap on Input method

5. Find the name of the keyboard you want to activate, and tap on it.

Alternate Text

6. Press the Home button
 If you want to test it to make sure it is activated, just press the Search key, and your keyboard will pop up like in the image above.

Read More..

Are you looking to get your hands on Samsung’s Galaxy S4 manual without buying the smartphone or borrowing it from a friend? There are numerous places on the Internet to find it for free.
In the U.S., you can find the Galaxy S4 manual in English and Spanish on Samsung’s own website for:

• Verizon Wireless
• AT&T
• T-Mobile
• Sprint (Unfortunately, Sprint does not have a Spanish Galaxy S4 manual available)

To download the manual(s), just hit the link for your corresponding carrier above, click “See all Downloads”, and hit the “Manuals” tab. From there, hit the PDF button for the Spanish or English manual, and once the manual is downloaded, a small overlay will pop up at the bottom right corner of your screen. Next to the print icon on the overlay is the save icon. Hit that to save it to your computer.
Samsung also has Galaxy S4 manuals in a variety of other languages on their website, including French, Russian, Japanese, Chinese, German, and Spanish.
Click the link for your corresponding language, and as mentioned above, once the page loads, a small overlay will appear at the bottom right of your screen. Right next to the print icon on the far right of the overlay is the save icon. Click that to save the Galaxy S4 manual to your computer.
For the few people that own an Exynos 5 (Octa core) version of Samsung’s flagship, you can find the Galaxy S4 manual here.

Read More..

In this post I will explain about some Android Secret Codes which are helpful to know about android device hardware and software configurations.

Now a days everyone using Smartphones that is Known Fact. And in India Most of the people are using Android Mobiles and Tablets. According to statistics Samsung alone sold almost 2 crores galaxy mobiles in India. And recently Micromax announced that it sold 1 million canvas mobiles phones and these statistics are increasing day by day.

So it’s good know about these secret codes.

Android Secret Codes:

AndroidSecretCodes

If your are an android geek or developer you might know these secret codes(or at least some of them).These codes are used by developers and Companies to change some system configurations .

Go through the following list

1. For IMEI Number: *#06#  

2. For RAM Memory version: *#*#3264#*#*

3. For FTA SW version: *#*#1111#*#*

4. For FTA HW version: *#*#2222#*#*

5. For Touchscreen version: *#*#2663#*#*

6. To test Bluetooth: *#*#232331#*#*

7. To display Bluetooth Physic Address: #*#232337#*#

8. To test secret GPS: *#*#1472365#*#*

9. To test other GPS:  *#*#1575#*#*

10. To test WiFi/Wireless LAN of phone: *#*#232339#*#* or *#*#528#*#* or *#*#526#*#*

11. To display Wi-Fi MAC Address: *#*#232338#*#*

12. To test Vibration and Back-light of device: *#*#0842#*#*

13. To test Proximity/Distance Sensor: *#*#0588#*#*

14. To test Touchscreen: *#*#2663#*#*

15. For Audio Test: *#*#0289#*#* or *#*#0673#*#*

16. To launch Service Mode: *#*#197328640#*#*

17. Hidden Service Menu (Motorola Droid): ##7764726

18. Field Test: *#*#7262626#*#*

19. To format the phone: *2767*3855#

20. To Restore Factory Settings: *#*#7780#*#*

21. To create Immediate backup of your multimedia files: *#*#273282*255*663282*#*#*

22. To display Phone Information: *#*#4636#*#*

23. To get detailed Camera Information: *#*#34971539#*#*

24. For Software & Hardware Information: *#12580*369#

25. To display HSDPA/HSUPA Control Menu: *#301279#

26. To start GTalk Monitoring: *#*#8255#*#*

27. To get PDA, Phone, H/W and RF Call Date: *#*#4986*2650468#*#*

28. Displays Build Time and Change List number: *#*#44336#*#*

29. Packet Loopback Test: *#*#0283#*#*

30. LCD  Display Test: *#*#0*#*#*

31. Enter Service Menu (on New Phones): *#0*#

32. Diagnostic Configuration: *#9090#

33. USB Logging Control: *#872564#

34. System Dump Mode: *#9900#

35. View Phone Lock Status: *#7465625#

36. Executes Emergency Dial Screen to unlock PUK Code: **05**#

37. Enables Voice Dialing Logging Mode: *#*#8351#*#*

38. Disables Voice Dialing Logging Mode: *#*#8350#*#*

39. Change behavior of Power button: *#*#7594#*#*

Read More..

Sometimes we wish to find out the details of a mobile phone user with his mobile number who is annoying us from days or from months.
Tracing a mobile phone is never being an easy task. There are lots of tools and services present on internet who claims to find out the details of a mobile phone number. But government made some guide lines on which they work on. In simple terms these services can only able to trace the circle and operator which a mobile phone number is working on.

       So here’s the million dollar Question, How to find out any mobile user name and location by his mobile number.

There is a service named “True Caller” can able to trace the mobile user name and location by his mobile number. This service works well with almost any phones including Nokia, Android, iPhone, Blackberry, Acer, HTC, LG, Samsung, Motorola, Sony ericsson and windows phones.


Lets start

1) Go to http://m.truecaller.com/ with your mobile phone.

2) Download True caller application and Install it on your phone.

3) Open True caller application and enter mobile number to be trace in Name Or Number Field.

4) Leave address field empty and press search button. And you’re done.

Name and other details of mobile phone number will be on your screen.

Thumbs up:

1) Application is absolutely free.

2) We can trace mobile phone or landline numbers world wide.
3) True caller also provide a blacklist option. To prevent unwanted calls.

Thumbs down:

1) Needs a internet connection to work on.
2) Application copies your phonebook to their database.
3) True caller database is very big but doesn’t contain all mobile phone numbers.

How True Caller works

True caller simply copies phonebook to their database at the time when a user install that application on his phone. When you use this application your entire contact list will be copied to their database. And this database will be served for future searches.
True caller is working like a directory and this directory is tremendously increasing everyday.

How to Remove Any Number details From True Caller

you can easily remove any number from True Caller database by going through this link http://www.truecaller.com/unlist
They usually takes 1 hour to delete a number from their database.

Read More..

Before the invention of smartphones and hi-tech mobile OS users mainly used their phones for calling and messaging. Since that time the call costs have been inflating. With improvement of technologies, the users are blessed with plenty of apps that they can use day today for varied purposes. One of the main purpose being free calls. With National and International call rates heavily shooting up the following Android Apps will let you to make free phone calls at a much less price (data connection charges/Wi-Fi charges alone).

The following are top free phone call apps for your Android/iPhone/Windows devices:

1. Fring:

Fring has a lot of great features that will make you go for it, ranging from free calls to normal chat to advanced video calling. Fring app now lets you also to append various other communication based services viz. AOL, GTalk. Also there is an option for connecting with your phone’s contact book thus letting you to talk with anyone with just one app.

However you can do the free call only when the other party has Fring app on their phone, which is obvious. This won’t be a big problem since the Fring app available not only for Android, but also on other operating systems like iOS, Windows, Symbian and also via a mobile browser.

Their latest feature is being capable of video calling between four people at the same time over any Wi-Fi or data connection. Albeit it’s fun to try this out, it looks a bit choppy too.

Additionally, you can call to regular phones also by buying some credits or points (similar to Skype) so you can now talk to landlines.

2. Line:

Line is the latest and very innovative app that lets users to make free voice calls for 24 hours a day. You can update your friends about anything and everything from your Android phone by using text, calls, photos, video calls, stickers and location info also. You can call all your friends from anywhere in the world and make calls internationally for free. Line is available in the Google Play Store for free download. Other noteworthy features are stickers, emoticons.

3. ooVoo:

ooVoo is a basically a video chat app that was developed by ooVoo corporation. You can view friends who use ooVoo and select their profiles for making video call, voice call or to send instant text or even video messages. You can make conference calls with up to 12 people at the same time. This app has options to save videos and photos that were sent by your friends. Speed dial option is present which will help you to keep up with five best friends while on the go.

4. Viber:

Viber is the most straight forward and hassle free app. All you have got to do is install this app and then it will search all the users in your contact box who use Viber and connect you to them. You don’t need nicknames or e-mail verification. You phone number serves as a unique user ID.

Put this app in your home screen and then use this as a calling function instead of your carrier based call and you are not only allowed to make free calls to the other Viber users but you can also send SMS to them. This is an efficient app to make normal SMS and calls and also email right from the app. The one thing that makes Viber outstanding is its call quality. The audio is very clear without any lags. It is so clear that you will think that you ate using your regular carrier phone line. This is a must have free call app on your Android.

The other free call apps include Skype, Tango, Tru App, Qik, Nimbuzz, Google Voice, ICQ, etc...

Read More..

Google has released the official Android 4.3 Jelly Bean update for the Google Play Edition of the Samsung Galaxy S4 (GT-I9505G).

Samsung Galaxy S4 I9505G users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505G. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505G (CF-Auto-Root-jgedlte-jgedlteue-gti9505g.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505G Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jgedlte-jgedlteue-gti9505g.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505G running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..