A new software update based on Android 4.2.2 Jelly Bean with firmware build number I9500XXUBMG9 has been rolled out on Samsung Galaxy S4 with model number GT-I9500.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XXUBMG9 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 XXUBMG9 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 XXUBMG9 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

The U.S. Cellular subscribers of Samsung Galaxy S4 (SCH-R970) has started receiving Android 4.3 Jelly Bean update with firmware build number R970TYUEMJA. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (U.S. Cellular) SCH-R970 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the U.S. Cellular version of Samsung Galaxy S4 (SCH-R970). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 (U.S. Cellular) SCH-R970 (CF-Auto-Root-jflteusc-jflteusc-schr970.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (U.S. Cellular) SCH-R970 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflteusc-jflteusc-schr970.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (U.S. Cellular) SCH-R970 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More..

Download Root Explrer For Android

Root Explorer is the ultimate file manager for root users. Access the whole of androids file system (including the elusive data folder!).

Features include multiple tabs, Google Drive, Box, Dropbox and network (SMB) support, SQLite database viewer, Text Editor, create and extract zip or tar/gzip files, extract rar archives, multi-select, execute scripts, search, remount, permissions, bookmarks, send files (via email, bluetooth etc), image thumbnails, APK binary XML viewer, change file owner/group, create symbolic link, "Open With" facility, MD5, create shortcuts.

We will always try to help with any problem you may have with the app. If we cant help then you can have a refund, no questions asked.

Although 16,000+ five star ratings will tell you that most people are very satisfied customers. Make sure you read as many comments as possible to get a good idea of what most people think of the app.

We still respect the old 24 hour refund policy. So if youre not happy with the app just email us within 24 hours and you can have a refund. Well need to know the order number, which you can find on the emails sent to you by Google when you downloaded.

Why compromise? Get the original and the best!

New permissions:

• Full network access - Required for network and cloud access. No information is passed to us over the internet.
• Add or remove accounts - Used by the Google Drive SDK to add a new account if desired. No changes are made to existing accounts and no details accessed apart from the account name.
• Find accounts on the device - Used to list available accounts for logging into Google Drive.
• Prevent from sleeping - Used to stop the device sleeping during long operations so they are not interrupted.

Screenshot:

Whats New:
v3.1.5
• Upgraded Box API from v1 to v2. You will need to re-enter your login details if you have any saved Box tabs.
v3.1.4
• A couple more bug fixes. Thanks for your help in tracking these down.
v3.1.3
• Updated to use latest Android SDK (4.4) and Google Drive SDK.
• General performance and stability improvements.
• Fixed bugs reported since last release.
v3.1.2
• New themes (available in preferences). Light, light with dark action bar and home wallpaper (including live wallpaper).

Download Root Explorer v3.1.5 Apk

 

Download On Google Play

Read More..

Samsung has released its latest official Android 4.1.2 Jelly Bean update firmware for the Sprint subscribers of Galaxy S3 with model number SPH-L710. The firmware is now available as Over-The-Air (OTA) update for the users.

Samsung Galaxy S3 (Sprint) SPH-L710 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S3 on the computer.
2) Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the tablet is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root (Mirror Link) for Galaxy S3 (Sprint) SPH-L710 (CF-Auto-Root-d2spr-d2spr-sphl710.zip)
2. Odin 3.07

Steps to Root Galaxy S3 (Sprint) SPH-L710 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Run Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

The International version of Samsung Galaxy S3 with model number GT-I9300 has received Android 4.3 Jelly Bean update firmware. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S3 I9300 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the international version of Samsung Galaxy S3 (GT-I9300). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 I9300 (CF-Auto-Root-m0-m0xx-gti9300.zip)
2. Odin 3.07

Steps to Root Galaxy S3 I9300 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 I9300 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

The LTE version of Samsung Galaxy S4 with model number GT-I9500 has officially received the Android 4.3 Jelly Bean update. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 I9505 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505 (CF-Auto-Root-jflte-jfltexx-gti9505.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Google has released the official Android 4.3 Jelly Bean update for the Google Play Edition of the Samsung Galaxy S4 (GT-I9505G).

Samsung Galaxy S4 I9505G users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505G. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505G (CF-Auto-Root-jgedlte-jgedlteue-gti9505g.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505G Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jgedlte-jgedlteue-gti9505g.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505G running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Samsung has just started rolling out the Android 4.3 Jelly Bean update with firmware build number I337MVLUEMK6 for the Canadian version of the Galaxy S4 (SGH-I337M) - Rogers, Bell, Telus, Virgin Mobile, Koodo, Fido, SaskTel. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (Canadian) SGH-I337M users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Canadian version of the Galaxy S4 with model number SGH-I337M. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy S4 (Canadian) SGH-I337M (CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (Canadian) SGH-I337M Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select theCF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 (Canadian) SGH-I337M running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

The Exynos 5 octa-core variant of Samsung Galaxy S4 (GT-I9500) has received a new software update with firmware build number I9500XWUBMG5. The new software update is still based on Android 4.2.2 Jelly Bean version and now available in India, Nepal, Sri Lanka, and Bangladesh.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XWUBMG5 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 XWUBMG5 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 XWUBMG5 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Virtua Tennis Challenge v4.5.4, one of the Worlds leading tennis game franchises, is available for the first time on smartphones with the new Virtua Tennis Challenge. Slice, lob and hit your best top spin as you take on the worlds best and compete against 50 players in 18 stadiums around the globe. Build concentration by making plays that match your players style; unleashing a super shot that will make your opponent sweat. Enjoy hours of game play through different modes, shots and courts.

Virtua Tennis Challenge v4.5.4

Virtua Tennis Challenge v4.5.4 Unique Features:

     SPT World Tour: Pick a customizable character to compete through full seasons of competition around the globe. Earn money by progressing through matches to buy your way into new tournaments. Each real world day offers new challenges.
     Quick Match Mode: Itching for a one minute dose of Virtua Tennis? Play fast singles challenges to increase your ranking
     Training Mode: Learn from the pros in this practice mode by running through drills
     Exhibition Match: Dive into the game and select from any unlocked courts and characters in single or doubles mode.
     Multiplayer: Challenge your friend face to face over Bluetooth

Whats New In Virtua Tennis Challenge v4.5.4 :

    New input methods: Swipe, Virtual Pad, Arcade and Game Pad
    Training Mode: Learn from the pros in this practice mode by running through drills
    Two new modes added:
    Quick Match Mode: Itching for a one minute dose of Virtua Tennis? Play fast singles challenges to increase your ranking.

DOWNLOAD LINKS

Part I
Part III
Part III

Read More..

Samsung Galaxy S4 (Verizon) SCH-I545 users who have already updated their devices with Android 4.2.2 VRUAME7 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses Root Exploit package created by Recognized XDA-Developers, DooMLoRD, which later modified by PWM978 to make it work on Galaxy S4 (Verizon) SCH-I545. The Root Exploit package allowing Galaxy S4 users to root their devices easily without having to wipe the device or flash a full prerooted factory image. Its completely supports Android 4.2.2 Jelly Bean with firmware build number I545VRUAME7.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Install Android Terminal Emulator on your device.
3. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
4. Make a backup of all your important data before following the guide.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Root Exploit package works only on Samsung Galaxy S4 (Verizon) SCH-I545 running on Android 4.2.2 VRUAME7 Jelly Bean firmware. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. Root Exploit (Mirror Link) for Galaxy S4 (Verizon) SCH-I545 (RootforVZWS4.zip)

Steps to Root Galaxy S4 (Verizon) SCH-I545 Running on Android 4.2.2 VRUAME7 Jelly Bean Firmware
Step 1: Extract Root Exploit package using winrar/7zip/winzip or any other extracting tool.
Step 2: Insert a microSD card into your device. Make sure it is formatted as exFAT (not FAT32).

Note: If you have a 64GB microSD card you can use your phone to format it as exFAT by default directly from the Storage settings. However, if you have anything less than 64GB microSD card you may have to use the computer to format it manually as exFAT. Remember, if your microSD card is not formatted as exFAT you will see "permission denied" errors when running the exploit.

Step 3: Connect the Galaxy S4 to the computer using USB cable.
Step 4: Copy all files and folders from the Root Exploit package directly onto the root of your microSD card (nowhere else).
Step 5: Open the Android Terminal Emulator app on your phone, then run the following commands:

cd /mnt/extSdCard
./pwn
./script.sh

Note: After running the second command you should have seen your $ change to a # meaning you have root access. The third command is required to make this root access permanent.

Step 6: Once all commands are completed, close the Android Terminal Emulator app and check if SuperSU has any update in the Google Play Store.
Step 7: Open SuperSU app and let the binary update itself to the latest (if any updates are available).
Step 8: Once completed, reboot your device and confirm you still have root access.

Galaxy S4 (Verizon) SCH-I545 running on Android 4.2.2 VRUAME7 Jelly Bean firmware is now rooted successfully.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Read More..

An official Android 4.2.2 Jelly Bean Over-The-Air (OTA) update with build number I337UCUAMF3 has been released for the AT&T subscribers of the Samsung Galaxy S4 (SGH-I337).

Galaxy S4 (AT&T) SGH-I337 users who have already updated their devices with Android 4.2.2 UCUAMF3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses the Root Exploit package created by Recognized XDA-Developers, DooMLoRD, which later adapted by Jortex to make it work on Galaxy S4 (AT&T) SGH-I337. The Root Exploit package allowing Galaxy S4 users to root their devices easily without having to wipe the device or flash a full prerooted factory image. Its completely supports Android 4.2.2 Jelly Bean with firmware build number I337UCUAMF3.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Install Android Terminal Emulator on your device.
3. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
4. Make a backup of all your important data before following the guide.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Root Exploit package works only on Samsung Galaxy S4 (AT&T) SGH-I337 running on Android 4.2.2 UCUAMF3 Jelly Bean firmware. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. Root Exploit (Mirror Link) for Galaxy S4 (AT&T) SGH-I337 (Root_for_ATTSG4_FM3.rar)

Steps to Root Galaxy S4 (AT&T) SGH-I337 Running on Android 4.2.2 UCUAMF3 Jelly Bean Firmware
Step 1: Extract Root Exploit package using winrar/7zip/winzip or any other extracting tool.
Step 2: Insert a microSD card into your device. Make sure it is formatted as exFAT (not FAT32).

Note: If you have a 64GB microSD card you can use your phone to format it as exFAT by default directly from the Storage settings. However, if you have anything less than 64GB microSD card you may have to use the computer to format it manually as exFAT. Remember, if your microSD card is not formatted as exFAT you will see "permission denied" errors when running the exploit.

Step 3: Connect the Galaxy S4 to the computer using USB cable.
Step 4: Copy all files and folders from the Root Exploit package directly onto the root of your microSD card (nowhere else).
Step 5: Open the Android Terminal Emulator app on your phone, then run the following commands:

cd /mnt/extSdCard
./pwn
./script.sh

Note: After running the second command you should have seen your $ change to a # meaning you have root access. The third command is required to make this root access permanent.

Step 6: Once all commands are completed, close the Android Terminal Emulator app and check if SuperSU has any update in the Google Play Store.
Step 7: Open SuperSU app and let the binary update itself to the latest (if any updates are available).
Step 8: Once completed, reboot your device and confirm you still have root access.

Galaxy S4 (AT&T) SGH-I337 running on Android 4.2.2 UCUAMF3 Jelly Bean firmware is now rooted successfully.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Read More..

Introduction:

After the Samsung Galaxy S3 was released, there were many rooting tools introduced into the market due to its increase in demand. Rooting the OS can help us do many custom operations like unlocking, customization of apps, different ROMs, custom kernels etc. Once you root your mobile, you can have better custom control over it where you can perform lot of operations. It is a tricky process and should be carefully carried out. If the processes are not followed exactly that might leave the phone damaged and dead.

While rooting the phone, make sure you are doing the processes safely by following the steps below. By rooting the phone, you are actually removing the mobile OS restrictions from the internal system of your device. After you finish rooting on your device, you can have complete access to the operating system and the internal system of your device.

Once rooted, you can customize your device’s system to,

• Install custom apps,
• Remove internal built-in apps,
• Modify internal settings,
• Add Custom recovery feature,
• Install Custom ROM firmware,
• Unlock you mobile.

So, with all these options after rooting we will be able to customize, optimize and power up the performances of your smartphone.

Rooting ~ step by step procedure:

Rooting process is the basis for any further customization options like creating recovery image, loading custom ROMs, and etc.

1. Download the root folder from the following link and save it on your computer.
2. On your preferred location, extract files from the archive.
3. On your phone, navigate to Menu -> Settings -> Security and enable the “Unknown Sources” option.
4. On your phone, enable the USB Debugging option from Menu -> Settings -> Developer options -> USB Debugging.
5. Connect your device to the computer and transfer the folder to your device.
6. Double click on RootDebugfs.bat file.
7. Follow the on-screen instructions.

The rooting is done, once the above execution is completed.

Installing clockwordmod recovery ~ step by step procedure:

Once your device is rooted based on above instructions, the clockworkmod recovery can be installed on your phone. Ensure that you have at least 60% of battery prior to installing this recovery procedure.

1. Download and install the ROM Manager app on your device using this Link: https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager
2. Launch the ROM Manager.
3. Click the option named, “Flash ClockworkMod Recovery”.
4. It’ll bring up a screen with the list of compatible devices, tap on your device name.
5. The recovery will now be downloaded and installed on your device.

This procedure successfully installs the Clockworkmod recovery on your S3.

Creating a custom recovery image ~ Step by Step procedure:

After rooting an S3, custom recovery images can be created, as all Android systems have a recovery partition. This recovery image can later be used if the OS has crashed and to reflash the OS for device recovery.

1. Launch the ROM Manager that you installed in the previous step and select Flash ClockworkMod Recovery and choose your device.
2. When you select the Superuser prompt, choose the “Grant” option.
3. The recovery image is created after it displays “Successfully flashed”.

Loading Custom ROMs ~ Step by step procedure:

Only if the device is rooted and a recovery image is created based on the steps mentioned above, Custom ROMs can be flashed into the device. All the different types of ROMs developed have their own differences, so try few and find which the best based on your usage.

• Select the ROM that you prefer based on your S3, then download it as a .zip file to your computer.
• Once downloaded, copy the .zip file without extracting, to the device’s SD card.
• Disconnect the device from the computer and open ROM Manager from your apps.
• Select the Reboot into Recovery option and the device would start rebooting after that.
• After entering into the recovery mode following the reboot process, use the volume buttons to navigate(selecting through options) and power button to select Backup and Recovery.
• Choose the Backup option and select yes for confirmation. This might take some time so you’ll have to wait till it completes.
• Select Wipe Data / Factory option ->Select Flash zip from sdcard.

• Select the copied zip(ROM) file from sdcard and choose it. Click yes for confirmation and wait for the process to finish flashing.
• Once it has finished flashing, Select Reboot System Now. It is the newly flashed ROM after the reboot is done.

Read More..

The T-Mobile version of the Samsung Galaxy S3 with model number SGH-T999 has already received the Android 4.3 Jelly Bean update with firmware build number T999UVUEMJC.

Samsung Galaxy S3 (T-Mobile) SGH-T999 users who have already installed their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA-Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Galaxy S3 (T-Mobile) SGH-T999. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 (T-Mobile) SGH-T999 (CF-Auto-Root-d2tmo-d2tmo-sght999.zip)
2. Odin 3.07

Steps to Root Galaxy S3 (T-Mobile) SGH-T999 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2tmo-d2tmo-sght999.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S3 (T-Mobile) SGH-T999 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

setcpu for root users v2 2 4

Type : apk

Size : 413 KB

Artis :
Android Apk Setcpu

Rating :

Search Result

SetCPU for Root Users v2.2.4 - iPmart® forum
SetCPU for Root Users v2.2.4 Requirements: Android OS 2.1 - 2.3 Overview: SetCPU is a tool for changing the CPU settings (capable of overclock and underclock) on a ...

SetCPU for Root Users v2.2.4 - MobilePhoneTalk.Com - Android ...
SetCPU for Root Users v2.2.4 Requirements: Android OS 2.1 - 2.3 Overview: SetCPU is a tool for changing the CPU settings (capable of overclock and underclock) on a ...

SetCPU for Android
SetCPU for Android is a powerful root utility that gives you full control of your Android devices CPU and more.

SetCPU for Root Users v2.2.4 Apk Android AndroAppsLib ...
Home; Disclaimer; Android Games

SetCPU for Root Users v2.2.4 (2.2.4) Android Apk Game ...
SetCPU for Root Users v2.2.4 (2.2.4) Android Apk Game Requirements: Android OS 2.1 - 2.3 Overview: SetCPU is a tool for changing the CPU settings (capable of ...

download SetCPU for Root Users v2.2.4 92.2.4) apk android ...
download SetCPU for Root Users v2.2.4 apk android mediafire links here,(using mirror creator). SetCPU is a tool for changing the CPU settings (capable of overclock ...

setcpu_for_root_users_v2.2.4_2 - Download - 4shared
setcpu_for_root_users_v2.2.4_2.apk. by josi_gonzalez 413 KB | 2012-03-27 | File | Report Abuse. setcpu_for_root_users_v2.2.4_2 - download at 4shared. setcpu_for_root_ ...

setcpu for root users v2.2.4 - 4shared.com download free - 1
setcpu for root users v2.2.4 - free download - 111 new files with setcpu for root users v2.2.4 found at 4shared. Start downloading setcpu for root users v2.2.4 now ...

Android Apps Portal: SetCPU for Root Users v2.2.4 Apk Android ...
SetCPU is a tool for changing the CPU settings (capable of overclock and underclock) on a rooted Motorola Droid, Nexus One, G1, G2, Samsung Galaxy S ...

setcpu for root users v2.2.4 - Download - 4shared - Mamas Sumarno
setcpu for root users v2.2.4.apk. by Mamas S. 413 KB | 2011-11-02 | File | Report Abuse. setcpu for root users v2.2.4 - download at 4shared. setcpu for root users v2 ...

Description

setcpu for root users v2.2.4.apk. by Mamas S. 413 KB | 2011-11-02 | File | Report Abuse. setcpu for root users v2.2.4 - download at 4shared. setcpu for root users v2 ...,SetCPU is a tool for changing the CPU settings (capable of overclock and underclock) on a rooted Motorola Droid, Nexus One, G1, G2, Samsung Galaxy S ...,setcpu for root users v2.2.4 - free download - 111 new files with setcpu for root users v2.2.4 found at 4shared. Start downloading setcpu for root users v2.2.4 now ...,setcpu_for_root_users_v2.2.4_2.apk. by josi_gonzalez 413 KB | 2012-03-27 | File | Report Abuse. setcpu_for_root_users_v2.2.4_2 - download at 4shared. setcpu_for_root_ ...,download SetCPU for Root Users v2.2.4 apk android mediafire links here,(using mirror creator). SetCPU is a tool for changing the CPU settings (capable of overclock ...,SetCPU for Root Users v2.2.4 (2.2.4) Android Apk Game Requirements: Android OS 2.1 - 2.3 Overview: SetCPU is a tool for changing the CPU settings (capable of ...,Home; Disclaimer; Android Games,SetCPU for Android is a powerful root utility that gives you full control of your Android devices CPU and more.,SetCPU for Root Users v2.2.4 Requirements: Android OS 2.1 - 2.3 Overview: SetCPU is a tool for changing the CPU settings (capable of overclock and underclock) on a ...,SetCPU for Root Users v2.2.4 Requirements: Android OS 2.1 - 2.3 Overview: SetCPU is a tool for changing the CPU settings (capable of overclock and underclock) on a ...

Similar Post

• Xaj3FyQ 1 50 Android
• ma23
• Android Game Pack 23 MRC
• com google android apps translate 2013 03 27
• Shadow Guardian HD (1 0 2)
• edaClock PRO 4 3 4 Android
• Chicken Battle (1 6)
• Crystal Throne v1 0 Game AnDrOiD
• nlp101
• smto1 4 9 Android

Read More..